> Note that the LCD controller is busy for approximately 10ms
> after power up, so you must wait at least this long before
> attemping to configure it!

Very true. I've had to increase my delay after power-up from
the usual 15ms to 30ms with some (no-name) brands. They
simply don't play ball if you try to initialise too early. Maybe
start with 50ms, decrease until it fails if power-up time is an
issue


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist