In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Shawn Lowe wrote:

Hello!
OK, I finally am playing with my sx lite kit I bought a while back. I've decided to play around with a ds1620 I have that I could not get to work with my bs2sx. Right now, I am not even hooking up the chip. I have downloaded the sx serial lcd demo program into my sx28 (hey, hey! downloaded and ran...yeah no problems! :smile:  ) When I run the program however, my lcd fills with triangles. I have played with the baud settings on the back (2400 or 9600), I have changed the serout speed and the true, open true values yet i still have triangles. I know my sx is sending data because I have characters moving randomly on the lcd, it just really acts like I have the baud setting wrong. attached is my program. I just have a wire from ra1 to the serial data pin on the lcd.

 

Sooo, any suggestions?

 

Thanks

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=195281

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)