Sorry, I was faster with typing then reading... ICD2 does not see that
device as well.

Do you have pull-down resistor on PGM pin?

Tamas


On 6/1/07, Tamas Rudnai <tamas.rudnai@gmail.com> wrote:
>
> Hi Alan,
>
> Last time I had a problem like this was that I forgot to select device
> family so that PicKit2 was looking for mid-range device while I had a base
> line hanging on it. Other possibility is that you have the first generation
> of PicKit2 (black button) and you do not have the PGC&PGD pulled down to the
> ground.
>
> Tamas
>
>
> On 6/1/07, alan smith <micro_eng2@yahoo.com> wrote:
> >
> > its late.  First article boards in, pair of em.  Simple...16F818,
> > nothing fancy, have the ISP tied to a header..mclr,power and pgc and pgd
> >
> >   Hooking up either the ICD2 or the pickit2, it can't see the device, on
> > either board.
> >
> >   Checked the power...device has power on its pins.
> >
> >   double checked PGC and PCD to the right pins on the header, all is
> > well.
> >
> >   Verified the ICD2 and pickit2 talk to other devices.
> >
> >   So....whats the typical suspect when the device cant be found? I even
> > replaced one chip thinking...off (way off chance) it was bad.
> >
> >   frustrated....heading to bed...looking for suggestions in the
> > morning....gotta be simple!!!
> >
> >
> >
> > ---------------------------------
> > Take the Internet to Go: Yahoo!Go puts the Internet in your pocket:
> > mail, news, photos & more.
> > --
> > http://www.piclist.com PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
>
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist