A quick google yeilded  the following site that has the part:
   
  http://www.icplus.net
   
  Dave

Victor Fraenckel <victorf@windreader.com> wrote:
  I have searched all of the standard US distributors (Digikey, Newark, 
Mouser and Jameco) for a Molex Milli-grid (2mm pitch dual row) wire to 
pcb IDC 20 pin connector. I believe the Molex part number is 8756820xx. 
This part appears to be obsolete. I have a small GPS module which has 
the matching connector for interface to the power and signals. I would 
like to get the boards into service. I have 10 boards so would need 10 
of the connectors. I would not like to solder the wires directly to the 
on-board connector. Any suggestions as to where else I might look or 
what I might use?

Any enlightenment will be appreciated.

Vic
-- 

*____________________________________________________________________________________________*

*Victor Fraenckel
KC2GUI
victorf ATSIGN windreader DOT com**

*


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist