In SX Microcontrollers, SX/B Compiler and SX-Key Tool, stef wrote:

Hi bean
 

In attachement you can find two scans of my schematics. I hope you understand my drawings.

 

I made a smale supprint with only the sx48 on. You can find de pin numbering in img2. That print I can plug on the main print (img1). This way I can swap sx48 without much soldingwork. 

 

One thing I'm not shure off. Thier are several pins gnd and vdd on the sx48 ship. (see ex pin 1,7,21,35 for vdd) I made for all the connection to my power supplie. Same for gnd. Is that necassery??? Is that casing the problem?? I don't know.

 

Can you give mee a look at the schematic and give me your findings/remaks ....

 

Thanks in advance.

 

Stef

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=191612#m193105

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)