Thanks, this will be shorter, I somehow missed swapf and used four
shifts instead.

On 5/21/07, Dave Mumert <dmumert@telusplanet.net> wrote:
> Hello Again
>
> Here is some code that should do a proper conversion
>     swapf   LSB,w   ;move fractions to upper nibble
>     andlw   0Fh     ;and get rid of them
>     movwf   Temp
>     swapf   MSB,w   ;move S bits to lower nibble
>     andlw   70H     ;and get rid of them
>     iorwf   Temp,w  ;put the MSB and LSB together
>     movwf   BIN
>
>
>
> >
> >
> > Hi
> >
> > If I read the data sheet right the LSB is sent first then the MSB.
> >
> > I haven't  written the code but I would think you need to SWAP the nibbles
> > in the LSB then AND the result with 0F hex.  Then SWAP the nibbles in the
> > MSB then AND with 07hex.  Then OR the LSB with the MSB to get the
> > temperature in binary.
> >
> > Good Luck
> >
> > Dave
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>


-- 
KPL
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist