In SX Microcontrollers, SX/B Compiler and SX-Key Tool, green_phantom wrote:

:hop:  Yay!
 

Amidst the confusion, I decided to go USB and purchase the SX Blitz Programmer.  Blitz saved the day!  My e-machines is capable of acquiring the USB Drivers for devices like the SX.  The USB Serial Port on this computer for the SX Blitz is recognized by the Device Manager as COM4.  It unexpectedly performed belying the "Incorrect Device Drivers" problem displayed in the [url=http://www.parallax.com]www.parallax.com[/url] web pages.  I gave one of the SX/B programs (HIGH-LOW.SXB) one last shot and this time it programmed the SX Chip!

 

So, Mr. Savage, I don't need to send over the SX Key device for testing anymore.  I now know it was defective when I first attempted to program the SX device.  However, is it possible to return the device to replace it?  Once I installed the USB drivers for the SX Blitz, it proved that the SX Key is defective and needs replacement.  The next question is, though... what device am I going to invent with the SX chips???  From here onward, that's left to my imagination... and likely the purchase of devices like Multilabs' ezVID and ezVGA and other goodies.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=188662#m190017

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)