Richard Prosser wrote:

> I'm looking for suggestions for a reset chip to be used with an M16C62
> running off 3.3V.

I've used Microchip TC54.

> Also a LDO 3V3 linear reg for about 40mA current drain. Input Voltage
> is about 4.5V. Again - small cheap & available.

I've used REG101, but it may be too expensive for your application.

Gerhard

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist