You ahould really consider the 10F parts. Amall, simple, efficient. Rolf James Salisbury wrote: > Hi, > > Looking at the specs for the 12F675 lp mode with 32 KHz xtal 5V 35 uA > typical. Internal Ossc 4MHz 800uA typical. > ----- Original Message ----- > From: "wouter van ooijen" > To: "'Microcontroller discussion list - Public.'" > Sent: Monday, May 07, 2007 9:48 PM > Subject: RE: [PIC] Low power function required > > > >>> I am looking to use a pic as a custom LED flasher, what is the >>> lowest power part when clocked with a 32KHz crystal? >>> >> Why a crystal at all? Take a any micropower PIC and use its internal >> oscillator. Or does your flasher need 50 ppm accuracy? >> >> Wouter van Ooijen >> >> -- ------------------------------------------- >> Van Ooijen Technische Informatica: www.voti.nl >> consultancy, development, PICmicro products >> docent Hogeschool van Utrecht: www.voti.nl/hvu >> >> >> >> -- >> http://www.piclist.com PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> >> >> > > > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist