Hi,

Looking at the specs for the 12F675 lp mode with 32 KHz xtal 5V 35 uA 
typical. Internal  Ossc 4MHz 800uA typical.
----- Original Message ----- 
From: "wouter van ooijen" <wouter@voti.nl>
To: "'Microcontroller discussion list - Public.'" <piclist@mit.edu>
Sent: Monday, May 07, 2007 9:48 PM
Subject: RE: [PIC] Low power function required


>> I am looking to use a pic as a custom LED flasher, what is the
>> lowest power part when clocked with a 32KHz crystal?
>
> Why a crystal at all? Take a any micropower PIC and use its internal
> oscillator. Or does your flasher need 50 ppm accuracy?
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
> docent Hogeschool van Utrecht: www.voti.nl/hvu
>
>
>
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
> 


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist