In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Ductapemaster wrote:

I tried it an it seemed like it wanted to work, but I got about 6 different errors when I tried.  First, I got some errors saying that the port was already in use, but those went away and then I got a couple 'communication failed' errors (The box that says what frequency the Key is generating was behind it, so it worked for a bit).  After trying this a few more times, it just went back to the 'SX-Key not found on COM1' error again.

I don't understand why the port would be in use by something else, as the only other thing I use thats serial is my basic stamp, and that software isn't even installed on this computer (it is on my other one that I tried this with).

Any other suggestions?

-Dan

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=188854#m189368

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)