No Alan, I didn't verify it by meter, but there is message is displaying
while programming the PIC that "ICD is not detecting any voltage, reconnect
your power supply " what should I do now, should I need to verify it through
meter,

On 5/4/07, Alan B. Pearce <A.B.Pearce@rl.ac.uk> wrote:
>
> >MPLAB ICD not detecting any Vdd voltage from my PICDEM.net
> >board, please suggest me what may be the reason
>
> Have you used a meter to verify if there is any voltage supplied to the
> PICDEM board.
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist