Timothy Weber wrote:
> These are not identical, but maybe close enough?
>
> http://www.allelectronics.com/cgi-bin/category/300/Keypads.html
>   
I like the legend, but the problem with these are that they are 1/3" 
thick which is ok for a panel, but not ok for a small plastic enclosure 
(which sometimes doesn't have much more than 1/3" to work with).

Digikey has the same keypads - with it looks like the same problem.

The ones I've seen in the past are flat and adhesive.  They usually have 
a flat ribbon cable (often the printed circuit plastic stuff) which 
slides through a hole in the enclosure and connects to a FFC/FPC 
connector on the circuit board.

-forrest
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist