In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Ductapemaster wrote:

I plugged everything in and the software programmed and debugged the SX once, but after that, I couldn't get to work again.  I measured the V+ and it was 4.96V, so close enough.  So it's still not working as it seems.

After all, I am using one of the Parallax boards, so the regulator should be suited to this application, but you never know.

I did notice something peculiar though...when the SX-Key works, it gets warm (from what I have read so far, thats normal behavior), but when it won't program/debug and I get that error, it puts out little to no heat.  Not sure if that helps at all, but I though I would mention it.

Thanks for your suggestion!

Dan

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=188854#m188880

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)