Yes I've been through all this many times, thanks.
--
Martin

On 4/24/07, Gerhard Fiedler <lists@connectionbrazil.com> wrote:
> Martin Klingensmith wrote:
>
> > I built half of a controller already with an ISOTOP MOSFET and
> > schottky. It's rated for a maximum of around 200 amps so I think I'll
> > keep it around 100A peak.
>
> Sorry if this is too obvious :)  -- but these MOSFET max. current specs are
> not really something to go by. You need to check (at least) the exact
> output curves (Vds vs Id) and the thermal data.
>
> Gerhard
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>


-- 
Martin Klingensmith
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist