> I am looking for such a device. I need it small, fast, and I need at
> least three.
> Output current should be settable, over a reasonable range. I expect
> to be using 10-100mA. Input is from a 9 - 12V source.
>
> Anyone seen something like this?
> Linear solutions are not acceptable.

The best solution I can think of is to use an LM317 in current mode - total 
of 2 components for a fixed current source, the LM317 and a resistor to set 
the current.

Take the output from the adj terminal, and select the resistor from the 
output to adj terminals for 1.25V drop at the desired current.

To make current settable, use an FET as an adjustable resistor, or use a 
range of resistors to set a range of fixed currents, and switch them in and 
out as desired using FET switches. 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist