In SX Microcontrollers, SX/B Compiler and SX-Key Tool, tdg8934 wrote:

Here are some pics of the 2 modules I have. I bought an extra board and a few necessary parts as an experiment module. I think my camera is starting to go on me which is surprising for a Sony. 

As you can see the first one (complete) I messed up thinking the module did not work so I carefully unsoldered the SX48 but pin 2 lifted on the board. I was able to run a short jumper wire to the OSC pin from pin 2. The problem was not on the board but in my code when I installed the 20 MHz resonator (that comes with it) but had my DEVICE line wrong (e.g. OSCXT1 and supposed to be OSCXT2). I also did not solder in the included EEPROM and socket and did not solder in the MAX232 chip and caps (as I wanted access to RA.0 to RA.3). All is working great now. 

The second module has only the necessary resistors and caps (no pins, no 5v regulator and cap, etc.) as it was meant for wire soldering. This one (after my 3rd practice - worked great first time - got my technique mastered - easier than I thought).

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=3&m=166781#m185961

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)