Hi John
No problemo.
 
 
 
 
Phillip
Things should be as simple as possible but no simpler
 
 
 
Phillip Coiner
CTO, GPS Source, Inc.
 
 
Your source for quality GNSS Networking Solutions and Design Services, Now!
-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
John Chung
Sent: Sunday, April 15, 2007 3:37 AM
To: Microcontroller discussion list - Public.
Subject: RE: [PIC] Pro_programer/head in dark place troubles

Do share your findings with the PICLIST. I am still
puzzled what went wrong.

Regards,
John Chung


--- Phillip Coiner <pcoiner@gpssource.com> wrote:

> Hi Olin
> I'm going to send it FedEx today.
> There are pictures and code on a CD I included that
> show orientation of the
> programming connector.
> My programming cable has a handedness the pictures
> on the CD will make this
> clear.
> The he target board is mounted on an RF board.
> Remember to disconnect the target from the RF board
> (just pull them apart)
> as it is not 5V tolerant. It did survive being
> connected to the Pro_prog @
> 5V the other day but seems like I fried one of the
> amplifier stages with the
> ICD2 a while back by supplying 5 V from it.
> If all goes well after programming you can then plug
> it back into the RF
> board and watch it work.
> I sent the schematic of the target board a while
> back if you can't locate it
> let me know.
> 
> Any critique good or bad the programming interface
> (or anything else for
> that matter) would be appreciated.
> 
> This is my cell 719-520-4452 (I keep it on 24/7 for
> my Asian and European
> customers so don't worry about odd hours if that is
> when you find your self
> working on things and need more info) 
> 
> 
> Phillip
> Things should be as simple as possible but no
> simpler
>  
>  
>  
> Phillip Coiner
> CTO, GPS Source, Inc.
>  
>  
> Your source for quality GNSS Networking Solutions
> and Design Services, Now!
> -----Original Message-----
> From: piclist-bounces@mit.edu
> [mailto:piclist-bounces@mit.edu] On Behalf Of
> Olin Lathrop
> Sent: Saturday, April 14, 2007 7:37 AM
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC] Pro_programer/head in dark place
> troubles
> 
> Phillip Coiner wrote:
> > I'll send a working board and a programming cable
> over first thing on
> > Monday.
> 
> Send it to:
> 
> Olin Lathrop
> Embed Inc
> 410 Great Road
> Littleton, MA  01460
> 
>
********************************************************************
> Embed Inc, Littleton Massachusetts,
> http://www.embedinc.com/products
> (978) 742-9014.  Gold level PIC consultants since
> 2000.
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/pic
> 
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist