> > What I don't know is what behavior I should expect at that point
>
> Denny, have you had a read of these
>
> Everything a System Engineer Needs to Know About Serial
> EEPROM Endurance
>
> http://ww1.microchip.com/downloads/en/AppNotes/00537.pdf
>
> EEPROM Endurance Tutorial
>
> http://ww1.microchip.com/downloads/en/AppNotes/00601.pdf
>
> Using the Microchip Endurance Predictive Software
>
> http://ww1.microchip.com/downloads/en/AppNotes/00562.pdf
>
> Endurance
>
> http://ww1.microchip.com/downloads/en/DeviceDoc/end240.zip
>
> Total Endurance Software Download
>
> http://ww1.microchip.com/downloads/en/DeviceDoc/totend40.zip
>
> "Microchip's New Total Endurance Disk Provides An Innovative
> Tool For Predicting Application Life Of Serial EEPROMs"
>
> http://ww1.microchip.com/downloads/en/DeviceDoc/061193.doc


Can I extrapolate FLASH endurance behavior from this information about
EEPROM endurance behavior?

I've been debugging with this particular chip for about a month now, using
an ICD2. The connection is a bit of a kludge, ICD cable to an RJ jack, about
4 inches of wire to molex connector and pin headers on the board. I've had
the occasional verify error that I chalked up to cable issues. Recently I've
been getting more verify errors (sometimes none - sometimes several in a
row) I'll be shipping this out in a couple days and I was trying to decide
if it was going to die in the customer's hands.


-Denny
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist