So assume what we know :-)

- You have the latest firmware from Microchip website for your PicStart
Plus?
- You have the latest version of MPLAB?
- You use this circuit and it does not do the job? (no any components
attached to pins 1,3 and 6 + you have the 100nF and the diode?)

                                       o Vdd
                                       |
                                       Z
                                       Z 22k
                                       Z
                10F206                 |
                (SOT23)             D1 \/
               +------+                |
  +---GP0/PGD -|1    6|- GP3/MCLR/Vpp--+--o-1 Vpp
  |       Vss+-|2    5|- Vdd-----+--------o-2 Vdd
  | +-GP1/PGC|-|3    4|- GP2     |  +-----o-3 Vss (ICSP conn)
  | |        | +------+    100nF == | +---o-4 PGD
  | |        |                   |  | | +-o-5 PGC
  | |        +-------------------+--+ | |
  | |        o                        | |
  | |       GND                       | |
  | +-----------------------------------+
  +-----------------------------------+

Tamas



On 4/9/07, Jinx <joecolquitt@clear.net.nz> wrote:
>
> > Everything but 10Fs works fine, so I'm suspecting MPLAB,
> > and am downloading 7.50 now. Hopefully it will be the solution.
> > If it is or it isn't I'll let you know
>
> It isn't
>
> Tried pspls44001.hex and then pspls45001.hex. No good. Just
> the same errors as before. Checked connections, again, and put
> another 10F on the board
>
> > Another solution is to buy the US$35 PICkit2 and solve
> > all your issues
>
> But that's not going to happen today is it. I have an EasyProg
> but it's not been tested or set up yet due to time constraints. It
> may be that now is the hour, after a quick grovel to the client
>
> Some 3-hour job that turned out to be. Now I know how the
> crew of the S.S. Minnow felt. Although they did have the extreme
> annoyance of Bob Denver as well
>
> I'd like to know if anyone has programmed a 10F with the PS+
>
> Googled around and had a quick look through the forums but
> didn't see anyone with this sort of problem
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



-- 
unPIC -- The PIC Disassembler
http://unpic.sourceforge.net
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist