Can you show your schematic, please, so we may have a chance to spot the
possible source of error.

Tamas


On 4/8/07, Jinx <joecolquitt@clear.net.nz> wrote:
>
>
> > on 10F2xx devices MCLR is on the same pin as Vpp therefore you
> > should protect your Vdd line with a diode (Vpp is 12V so it could
> > ruin your device / circuit and even your programmer)
>
> I tried Mclr with no resistor first ;-(
>
> Apart from perhaps updating the firmware (reluctant as on dial-up
> but will do if really necessary), fresh out of ideas and things to try
>
> (PS changed the subject line - despite being 'careful' I still wrote ISCP,
> which isn't helpful if searching the archives)
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



-- 
unPIC -- The PIC Disassembler
http://unpic.sourceforge.net
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist