On a related note ... I'm curious if anyone has any ideas on how to 
detect an incandescent vs. CF (or LED) bulbs.  The relevant difference 
being that most CF (no idea about LED) can't be dimmed.  Really not sure 
how this could be done!  Anybody ever do this?  Can it be done reliably 
with CF bulbs from different manufacturers?

J

John Walker wrote:
> Hi all! Long time lurker, first time poster.
> 
> I am working on a project where I want to use a PIC pin to detect that 
> an incandescent light bulb (120VAC 25W) has been inserted into a 
> standard light socket. I want to do this by using the fact that when a 
> bulb is in the socket its filament will act as a sort of switch across 
> the socket contacts. There are two ways I can think of doing this:
> 
> 1) I could use a DPDT relay connected across the socket and energize the 
> relay when I scan the socket. (Seems dangerous to me)
> 
> 2) I could use the technique discussed in the Microchip App. note 
> concerning AC interfacing. The problem with this is that I want to be 
> able to detect the bulb without having to turn it on. I could flow low 
> current through it but that would change the component values and cause 
> problems when the bulb is actually turned on with full current.
> 
> I'm sure there are several other ways to accomplish this and could use 
> your recommendations. To recap, I want to detect when a bulb is in a 
> socket using the filament as a switch. I will use a PIC pin to monitor 
> this and will use another PIC pin to turn the light on/off. The light 
> will be an incandescent type operating at 120VAC and be rated at 25W.
> 
> Thanks in advance.
> 
> 
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist