Harold Hallikainen wrote:
> Running a 18LF6722 at 3.3V, I found I could not reprogram it with the
> ICD-2 once I set the code protect. We modified our circuit so the PIC gets
> its voltage through the programming header, then told the ICD-2 to supply
> Vdd, which it does at 5V. Once the chip is programmed, we put a jumper on
> the programming header that provides 3.3V to the PIC. At 3.3V, we are
> still able to bootload the PIC, just not program it with the ICD-2, due to
> the bulk erase issue.

But you're saying the bulk erase is only a necessity because you've got 
code protect set here, yes?
-- 
Timothy J. Weber
http://timothyweber.org
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist