Olin,

On 4/3/07, Olin Lathrop <olin_piclist@embedinc.com> wrote:
> Anand Gadiyar wrote:
> > Using a voltmeter, the Vcc pin shows 5 volts with respect to GND.
> > And a output pin at logic high shows 4 volts with respect to GND. The
> > same pin shows 0 volts with respect to the Vcc pin. The same is
> > observed when i used a CRO to look at the waveforms.
>
> This is consistent with the pin having a high impedence connection to Vcc.
> The surprising part is that a voltmeter and oscilloscope would read the same
> value, but maybe you were using a 10x probe with the scope.

   I was wondering about this too. Couldn't explain it. Yes, I was
using a 10x probe with the scope. Guess that explains it. Thanks for
the pointers.

Warm Regards,
Anand
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist