Cable insulation measurement is done usualy with high voltage
megaohmeter. Standardised values for megaohmeter output voltages are
250V, 500V, 1.5KV, 2.5KV and 5KV. For capacitance usualy is used a
capacity meter with low voltage generator. Wire resistance could be
measured only if the cable is short circuited on one end and for this
measurement could be used a sensitive wheastone bridge.
I haven't seen a complex tool with all of these together. Maybe there are some.

On 2 Apr 2007 12:24:39 -0000, Binu S Pillai
<binu_s_pillai@rediffmail.com> wrote:
>
>
> Hello All
>    I am looking for a system or vendor that can supply me a system to measure cable insulation measurment, wire resistance, and capacitance between the two core of wire in a cable.
> Are there any systems that give RS232 output directly.
>
> Binu
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist