On 3/29/07, wouter van ooijen wrote: > > I guess another issue for me is that some of my current > > projects have 3 > > different PICs on different breadboards. So if I went with > > ICSP, I'd be > > forever moving one set of programming leads around on the > > breadboards - > > or I'd have to make three sets of flying-lead connectors to plug the > > programmer into. > > Why not use 3 programmers? Why not using one HV programmer connected to all ICSP on those three breadboards and switch just the MCLR and SDA with a simple three position two pole switch between those breadboards... Or use a LVP programmer for all breadboards and a simple multiplexer Or... -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist