> Always the detail man Wouter!

It never hurts to verify. In some contexts 2A would be considered a
small current...

> I checked the docs - looks like it's 57mA.

I recall you were switching 3.3V - so take care which FET you take
('default' FETs require ~ 8V to switch fully on) , but I think 1 Ohm
RDSon (57 mV drop) should be no problem. 

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist