In SX Microcontrollers, SX/B Compiler and SX-Key Tool, tdg8934 wrote:

I have gotten fustrated too many times on this project and almost to the point of giving up. 

All I wanted to do is display time and date information on my SX52 protoboard 16x16 LED matrix that JonnyMac has helped me with. However, as I am running out of variable space on the SX52 circuit, I thought perhaps displaying time and date info on an SX28 would be doable and then transfer bytes over to the SX52 circuit. 

However, since very little if any information exists about a DS1302 interfacing with an SX28, I thought I would start with a DS1302 interface with a BS2 since it has the DEBUG capability that the SX28 lacks. Going forward I have tried to send over the data between the BS2 and SX52 circuits and I can get single characters but not entire strings of date and time information.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=180571#m180704

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)