In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Mike_W wrote:

For any one who is interested

I changed the trigger constant from 1 to 5

and added a pause 250 at the end of the do loop

the results were positive, so I think I need to work on my timing issues.

 

when I use the BS2 i get a rawDist reading of 2000 + or so.

the SX/b gives me a rawDist readings around 800 and seemes to be limited to about 6 feet

these are readings taken around my office (a lot of furniture and stuff)

im going to the basement (large flat floor and no obstructions) I'll see what results I get there

 

Mike W

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=178081#m178385

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)