Rikard Bosnjakovic wrote:

>according to what you
>write, look like I've run into a problem since I need a
>32.768kHz-crystal.
>
Depending on exactly why you need to run this at this clock rate, you 
might be able to get away with the on-board 4Mhz clock with a timer.

I'd really consider moving to a different (bigger) part like the 16f886 
(28Pin) or 16f887 (40Pin), since you probably will also want to be able 
to do ICD at some point, which also requires 3 pins.  The '886 is only 
about $0.80/each more.

-forrest
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist