Have a look at the button pads at Sparkfun: beevo@cox.net wrote: > I need to find a source for some keypads for a small run project. Basic requirements are: > > Not a matrix pad (preferably), though I could design around one. > 3X3 or possibly 4X4 > sealed from dirt and moisture, should not need to be waterproof. > prefer something relatively flush to the case I will be using. > Lighted (red) for astronomy night time use > user (or mafr economically) labeled. > As inexpensive as possible. I have about $50 per pad to work with MAX > > I kinda like those pads with the silicone buttons molded into a sheet. > > OR (and you suspected there might be one...) The means to make above myself in such a way as to not look too home brew. > > I do have a machine shop at home so a bit of manufacturing is possible. > > Beevo (aka Bill VanOrden) > Tempe, AZ -- Timothy J. Weber http://timothyweber.org -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist