-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of Olin Lathrop
Sent: Wednesday, February 07, 2007 12:36 AM
To: Microcontroller discussion list - Public.
Subject: Re: [EE] Analysis of Olin's EUSB2 Circuit (sub circuit R2, D3, C2, Q1)

What you are "failing" at is responding (again having nothing to do with
technical correctness) to the questions I ask.  I can see some
misconceptions you have, so I ask questions and that will cause you to
figure out the thing you need to get past your misconceptions.  The problem
is you won't do as I ask.  You go off and try to analyze other parts of the
circuit I specifically said to forget about for now.  Several times now I
have told you to concentrate on R2 and D3, and you have yet to respond to
that at all.  I specifically said to ignore the 5.6V line going off the
page, but you won't.

>>> Lindy Answers:
Ok, I get it now.  Actually, you've made my job simpler.  R2 and D3.  I'll keep banging at that nut until I crack it.

I included the 5.6 because it was connected to Q1.  But 5.5v line, what 5.6v line. I don't even see it.  All I see is R2 and D3.  Actually all the other components disappeared too. (-:

Warmest regards,
Lindy

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist