In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Unsoundcode wrote:

Thanks for the input guys, my progress is good but Im at a point where it takes me several re-reads of a chapter to grasp it.

Tommy, I made that led blink with copied code, but I do fully understand it now. Like you say I understand every byte, Im not going to give up it's just going to take a long time. 

Ken, Im hungry for good books and have already been recommended to look at some of Guenther's works.

Keith, I'm purposely staying away from the SX basic for now to avoid slipping into the easy way out, once I feel I am somewhere near competent I will then look at the basic, right now I will concentrate on asm. ISR's and Uart's I see are important, but so difficult to understand.

Thanks again for the support

Jeff T.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=160995#m167098

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)