In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

Hello,

I spent quite a bit of time last night cleaning up the layout for the board and working on the silkscreen.  Since the space is tight the 'R' in the port names was dropped.  They now just go B0, B1, B2, etc..., thru E6, E7.  So far it looks good and with a little more work an initial run can be made.  At the moment I would be focusing on a kit version but won't rule out an assembled one down the road.  I really feel strongly that at least the kit should be available since it may get people started with surface mount parts and help teach methods of assembling them.

In regards to the voltage regulator, yes, it is located neatly underneath the module along with the socketed resonator and other parts.  That's why the top has a clean look (except for the two wires which have been incorporated on the board)

There is still work to do but so far I like the way it is turning out.

Best Regards,

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=166781#m167069

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)