This is my first at ordering a board (x 5) fabricated, and there are 
some issues, both mine and the fabricator. What should I expect as far 
as equitable handling of the situation. Here are the items:

1: 3 x 3 = 9 holes made 28 mils, should per the drill_file.drl be 45 
mil. In populating one board I had to drill out and lost most pads.


2: 3 x 1 = 3 holes, same size issue. my mistake, need the bigger holes.

3: 3 x 1 + 2 x 1 = 5 holes made 15 mil, should be 28 mil, my mistake, 
can live with these as they are, but if boards are to be remade, would 
prefer larger.

Should I expect fabricator to make boards over, and fix my mistakes at 
same time? Charge me reduced price, or a charge to fix my mistakes? 
Shipping (it's 5 days ground)? I can live with time, but would be nice 
shorter. Fabricator shorten lead time?

~:
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist