Carl,

Thanks for your suggestion, but we already tried this before but the contact
isn't good enough. Using these phone jacks results in a "bad quality
connector", the plug doesn't fit tight.

Thanks anyway!

Peter


-----Urspr=FCngliche Nachricht-----
Von: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] Im Auftrag von
Carl Denk
Gesendet: Freitag, 19. Januar 2007 14:54
An: Microcontroller discussion list - Public.
Betreff: Re: [EE:] Receptacle with diameter 1/8"

Check these out:
http://www.jameco.com/Jameco/catalogs/c271/P162.pdf

It might be the 1/8' is now called 3.5MM ??

Peter Feucht wrote:
>
> -----Urspr=FCngliche Nachricht-----
> Von: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] Im =

> Auftrag von Peter Feucht
> Gesendet: Freitag, 19. Januar 2007 13:45
> An: Pic Microcontroller Discussion List
> Betreff: [OT:] Receptacle with diameter 1/8"
>
> Ladies and gentlemen,
>  =

> after having spent more than 2 hours with googling and without succes =

> you are my last help....
>  =

> I'm simply looking for a receptacle with an inner diameter of 1/8 inch =

> (about 3,2mm) which must have a contact spring inside. The plug is =

> just a cylindrical pin.
>  =

> I'm sure there must be something outside there, may be I'm just using =

> the wrong search words.
>  =

> I would be pleased to get any help in this...
>  =

> Thanks in advance
>  =

> Peter
>  =

> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change your =

> membership options at http://mailman.mit.edu/mailman/listinfo/piclist
>
>
>
>   =

--
http://www.piclist.com PIC/SX FAQ & list archive View/change your membership
options at http://mailman.mit.edu/mailman/listinfo/piclist



-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist