Check these out:
http://www.jameco.com/Jameco/catalogs/c271/P162.pdf

It might be the 1/8' is now called 3.5MM ??

Peter Feucht wrote:
>  =

>
>
> mit freundlichen Gr=FC=DFen
>  =

> Dipl.-Ing.(FH) Peter Feucht
> Gesch=E4ftsf=FChrer
> p.feucht@palmed-medizintechnik.de
>  =

> PALMED GmbH
> Daloserweg 2
> D-89134 Blaustein, Germany
> Tel.     +49 - (0)7304 - 96 87 60
> Fax.    +49 - (0)7304 - 96 87 62
> email  info@palmed-medizintechnik.de
> web    www.palmed-medizintechnik.de
>  =

>
> -----Urspr=FCngliche Nachricht-----
> Von: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] Im Auftrag =
von
> Peter Feucht
> Gesendet: Freitag, 19. Januar 2007 13:45
> An: Pic Microcontroller Discussion List
> Betreff: [OT:] Receptacle with diameter 1/8"
>
> Ladies and gentlemen,
>  =

> after having spent more than 2 hours with googling and without succes you
> are my last help....
>  =

> I'm simply looking for a receptacle with an inner diameter of 1/8 inch
> (about 3,2mm) which must have a contact spring inside. The plug is just a
> cylindrical pin. =

>  =

> I'm sure there must be something outside there, may be I'm just using the
> wrong search words.
>  =

> I would be pleased to get any help in this...
>  =

> Thanks in advance
>  =

> Peter
>  =

> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change your members=
hip
> options at http://mailman.mit.edu/mailman/listinfo/piclist
>
>
>
>   =

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist