In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

If you want to build up a couple of projects that use the SX chip and learn
about it I would suggest getting one of the starter kits with the SX Key for
programming and the SX/Key software.  If you want to use SX/B just
open the Help file and look at the examples there.  You'll find several
projects that you can build with example code.  Use that as a starting
point.  I did something similar to the mutliplexed 7 segment displays but
instead drove a 5x5 LED matrix module i've had sitting for years.  It
was a good starter project which used an interrupt routine to refresh
the display.

Good luck,

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=165659#m165702

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)