I had some real estate available on two of my prototype runs to  
ExpressPCB and I made up some small boards to accommodate the tiny . 
050" spaced connector on the TI MSP430 Spy BiWire connection on the  
EZ430. If you have built your own target boards this thing can let  
you connect up in a non-klugey fashion. I basically set up four .029  
round through-hole pads spaced .050" to four .035 round through-hole  
pads spaced .100" with connecting traces. I have something over a  
dozen still left with various configurations on the connectors. I may  
have another bunch in a week or two

    <http://www.wulfden.org/msp430/>

---
cheers ... 73 de brian  riley,  n1bq , underhill center, vermont
   <http://web.mac.com/brianbr/>  Tech Blog
   <http://www.wulfden.org/DiskShop.shtml>
    Home of the
       K107 Serial LCD Controller Kit   FT817 Power Conditioner Kit
       Tab Robot Laser Tag Kit            MSP430 Chips and Connectors
       Propeller Robot Controller         SX48 "Tech Board" Kit



-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist