Vasile Surducan wrote:

>>Actually, the free version will let you do larger than 100mm x 80mm.
>>
>Who is the maximum density you can route on an 100x50mm board with Eagle ?
>
>500 SMD, 1500 pin, 2500 route, 2000 vias or you could more ?
>  
>

Beats me; I'm not really sure what you are asking has anything to do 
with what I stated?

I was just trying to point out that it is possible to utilize the free 
version for boards in the 4x4 inch range that somebody mentioned.  The 
last board I did for a (hobby) project was 115x75mm.  For asthetics, I 
wanted the width to match one of those surplus LCD terminals that 
Jan-Erik, James, and/or Wouter sell.  Stretching the board outline 
worked fine.  All the pads for the components still remained within the 
100x80mm area; I did have some mounting holes and ground plane extending 
outside the 100mm dimension, though.

http://i104.photobucket.com/albums/m168/agarb6/misc/avr.jpg

Aaron




-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist