subject=Re:[EE:] - Heat sink??
source= http://www.piclist.com/piclist/2006/11/23/121602a.txt?

---

http://www.piclist.com/member/cdenk-alltel-
PIC/PICList FAQ: http://www.piclist.com

Here's the latest on this thread:
Found some switching 5 volt wall warts that actually under my load are 
more like 5.4 volts actual. The PIC 18F1320 has 5.5 volt max. input, but 
the pressure sensors have a 5.2 volt max. Think I'll return the 5 volt 
wall warts to Digikey, and order a 6 volt switching or linear wall wart, 
and change the on board regulator from 7805 to a LDO LM2930T. The board 
is going to fabrication (quantity 3 or 4 to include spares to last a 
long time) with space for the TO3 regulator and a wire hole for direct 5 
volt.

Comments always appreciated. :)

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist