In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Mr_Nuke wrote:

if you add 1.397/2 mm on each side, you get a distance of 8.255 mm, which means there is about 0.228 mm of pad left on each size. Even if the pins don't fall exactly on the center of the pads, it shouldn't be any cause of concern.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=163564#m163978

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)