>From ARocket. I want one :-). But at $US500 for preproduction samples I'll wait a while . R http://www.analog.com/en/prod/0%2C2877%2CADIS16350%2C00.html The datasheet hasn't much details, but it will be updated in one week = or two. ----- Original Message ----- = From: "Damien Teney" To: Analog Devices is going to release a new sensor of their MEMS gyroscopes range. It's a full 3 axis intertial sensor with 320=B0/s gyros and 10G accelerometers. It has his built-in ADC, a SPI interface, and a bandwidth of 350 Hz. Everything in a 2 cu in cube ! I guess it could make a good small affordable IMU, associated with the proper computer and algorithms. Maybe a good thing for the folks building VTVL vehicles out there... Full production will begin end of May, but samples are avalaible before, in the range of $500/piece. Ask me off-list if you want the adress of the person to contact. Damien Teney -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist