I recall that NASA patent. So, what are the losses in a lightly loaded motor, and what do you do outside of the motor to reduce them? Harold > This goes back to a NASA patent from the '70's. Nothing new. I suspect > his 'patent pending' depends upon some minor new quirk or its simply an > 'application' and won't get any further. It's been on the market in > many different forms, by many manufacturers. It does work, but savings > depends highly upon the application. Best for a long-running lightly > loaded motor - in many cases it doesn't provide any ROI, in fact no > savings if the motor is sized properly in the first place. I've seen it > for less. I believe the same technology is already built into many > high-end appliances. > > Here's the same thing: > http://www.powerefficiencycorp.com/ > http://smservice.com/pwrcomm.htm > http://mlmvs.trustpass.alibaba.com/product/11458622/Nesly_Power_Saver.ht > ml > > Usually more than just power factor compensating capacitors. > > Gary Crowell > > > >> -----Original Message----- >> From: piclist-bounces@mit.edu >> [mailto:piclist-bounces@mit.edu] On Behalf Of Martin Klingensmith >> Sent: Saturday, December 16, 2006 7:43 PM >> To: Microcontroller discussion list - Public. >> Subject: Re: [OT] Stockton Engineer Creates Energy Saving Device >> >> How much more vague could it be? It sounds like a free energy >> device. I >> don't know what it does. Nobody knows what it does. Are we >> just supposed >> to say "oh, cool" >> I can't find any patents with his name either. Who knows. >> -- >> Martin K >> >> Jinx wrote: >> >> http://cbs13.com/local/local_story_347191740.html >> >> >> > >> > "Chuck Larue may be the man who drastically cuts your >> electricity bill" >> > >> > Realising that the device seems to be just for motors, I suspected >> > that the press had gone all hyperbolic again - "drastically" - but >> > then thought about his customer base >> > >> > Do homes in the "US And A" ** have many motors, such as AC, >> > fans, etc ? I'm pretty sure the only motor in most NZ homes, being >> > a temperate climate, is in the refrigerator >> > >> > Just a quibble - the article says that a 1/3 HP motor was using >> > 180W. As a HP is (ideally) 746W that would make it a 1/4 HP >> > and with heat losses you'd expect input W to be higher. Not >> > picking on anyone, may not have been reported accurately >> > >> > ** Thank you Borat >> > >> > >> >> -- >> http://www.piclist.com PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- FCC Rules Updated Daily at http://www.hallikainen.com - Advertising opportunities available! -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist