Mark Rages wrote:
> Where is the 8mS figure from?  On the programming spec I see Tprog2 = 2
> mS.

Hmm, you're right.  I was looking in my PICPRG.ENV file because that was
easy to grab at the time.  It has both program memory and EEPROM programming
times set to 8mS.  This was a error on my part back when I created the
16F630/676 part definition blocks, probably due to cut and paste from parts
that do have 8mS programming time.  I have fixed the PICPRG.ENV file to set
program memory to 2mS and EEPROM to 6 according to the spec.  I also set the
default so that it only does one verify with all operations at 5V, and added
16F630V to verify at the Vdd limits.

I'll rerun the test cases when I get back to my office this afternoon and
report the new times.

Thanks for bringing this to my attention.


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist