In SX Microcontrollers, SX/B Compiler and SX-Key Tool, jcpole wrote: Hi all... I've got a bunch of SX48/52 proto boards that I have used to build a custom brain for a combat robot I'm designing. My programs work just fine, and I'm at the point where I need to actually make the little guy move, and I've hit a snag. Is there anything special that I need to do to enable the servo connectors on these boards? The schematics seem to show that they are already hardwired, but I don't get anything when I connect servos to the boards. The schematics also mention a connection (actually, several connections) for Vsvo. I seem to recall reading somewhere that one shouldn't use regulated power for servos and DC motors - do I need to connect an alternate power source for the servos? I know that my servo logic is good because I tested the basic program (movement only) on a BS2px. The boards just don't seem to be providing any power to the servo connectors. Thanks... Jamie ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=158912 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)