In SX Microcontrollers, SX/B Compiler and SX-Key Tool, maxwin wrote:

Thank you both for your comments.

I would like to ask if you can guide me a little more. I am attaching my code file. At the moment, when I power up the SX28 and observe the data received on Hyperterminal (Windows), I get 5f 27 00, which is not what I expected from sending "A" then $62 from the code.

The SX28 to PC connection is simply: RA.1 to DB9 pin 2 (RX), SX28 vss to DB9 pin 5 (GND)
Protocol is 57600, 8 databits, No parity, 1 stop, No flow.

I haven't progressed onto making the serin part work correctly yet, and first I wanted to be able to transmit/serout to the PC correctly. Hopefully by understanding the solution to the first part, I will have learnt enough to solve the 2nd part (if indeed it needs solving from what I have already!)

But on the first part I have tried lots of different settings, and still seem to fail.

So I would really appreciate your suggestions! No doubt it is something simple - I only started with this SX dev yesterday!

Max.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=158762#m158832

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2006 (http://www.dotNetBB.com)