First let me thank those that responded. The "\n\r" outside the " was a 
typo, but I think what got me in trouble was the memory models. My 
thinking is that as the code grew, initially it was within the "small" 
model criteria, but as I added to the code, the boundary was crossed 
without warning. I had been aware of the memory model settings, but had 
over a period of time (month or 2, not years) overlooked the setting the 
memory model. Probably copied the "C" file to save the current working 
file and started a new project before moving on.


1: Is there a way to set defaults for MPLAB so the memory model and 
other items would always come up large when starting a new project?

2: Do other IDE's have similar issue of code model sizes? It would seem 
that along with all the other parameters that are set when selecting a 
target, this could be set also. What happened to "C" when ROM, Far, 
Near, etc. wasn't needed for simple programs. I'm just a hobbiest, but 
working on a real needed project (our house heating reliably this winter 
depends on it). Don't mind spending a few dollars, but not 100's on 
software. I guess I'm showing my age, but I still have a Manx C compiler 
for 8086.

ps: When referring to a manual, would be nice to have a key word or to 
to narrow the search.

Thanks again. :)

John Temples wrote:
> On Sun, 19 Nov 2006, Carl Denk wrote:
>
>   
>> just adding the following line to a  simple C file
>>
>>    printf( "Hello" \n\r );
>>     
>
> Is that what you really added?  That isn't valid C.
>
>   
>> generates the following error:
>>
>> HANDSHAKE-1.C:27:Warning [2066] type qualifier mismatch in assignment
>>     
>
> This is discussed in the "Getting Started" manual that came with the
> compiler.
>
> --
> John W. Temples, III
>   
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist