I just wanted to thank every one for their assistance with this problem.
   
  I was able to build the lesson code with no further problems.
   
  I have gone to lesson 5b and it had the same problem as 5a and wouldn't compile completely. So I went back and entered the org statement that fixed lesson 5a and another problem popped up.
   
  I get the following error when I try and build this lesson:
   
  MPLINK 4.05 LINKER
  Copyright (c) 2006 Microchip Technology Inc.
  ERROR-Section 'org_0' cannot fit the absolute section
  Section 'org_0' start 0x00000004. Length 0x00000012
  Errors: 1
   
  The code is:
   
  processor 16f84
  include <p16f84.inc>
  __config _HS_OSC & _WDT_OFF & _PWRTE_ON
  cblock H'20'
  spot1
  spot2
  endc
  org 0x0000
  bcf Status,Z
  bcf Status, C
  bcf Status,DC
  clrf spot1
  movlw D'15'
  movwf spot2
  movlw D'03'
  addwf spot2,F
  nop
  end
   
  I have the above code formatted correctly in the IDE. I just typed it in this way so it wouldn't run all over the page.
   
  Can some one please tell me what the error is and why the org statement would not fix the problem like it did in lesson 5a.
   
  I started this tutorial earlier this year and don't recall having any of these problems? I just restarted this tutorial as a refresher and all these problems popped up. The only difference is I am using a newer version of MPLAB v7.43.
   
  Thanks,
  Ed
   
   


 
---------------------------------
Sponsored Link

$420,000 Mortgage for $1,399/month -   Think You Pay Too Much For Your Mortgage? Find Out!
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist