Hi !

First, please use your ENTER key now and then to enter line-breakes
at suitable intervalls to get a nice and readable text.

Now,
Since you're adding a LNK file, MPLAB/MPASM expects a source file
written using "relocatable code". You're code isn't.
First try to simply remove the LNK file from your project.
Or add the CODE and other stuff to your source to make
it a true reloctable source file.

Regards,
Jan-Erik.

PS.
Are you aure that you're not usinf the 16F84A processor ?



Dr. Ed Edmondson, PhD wrote :
> I am attempting to use the "PIC Elmer 160 Course" as referenced on the new user FAQ. My problem is every time I try to build the code I get an Error 152 on lines 5 thru 9. Error 152 tells me: "Executable code and data must be defined in an appropriate section"  
>    
>   I looked the error up in Chapter 8 of the Assembler,Linker/Librarian User Guide and it tells me that "When generating an object file, all executable code and data declarations must be placed within appopriate sections". I am using MPLAB 7.43 (what I downloaded from the Microchip web site) an installed it on my computer which runs Windows XP. I am using the Microchip 16F84.lnk . 
>    
>   The code is as follows:
>    
>   1.   Processor 16F84
>   2.   include <p16f84.inc>
>   3.   __config _HS_OSC & _WDT_OFF & _PWRTE_ON
>   4.  spot1   equ   H'30'
>   5.  movlw   D'5'
>   6.  movwf   spot1
>   7.  clrw
>   8.  clrf   spot1
>   9.  nop
>   10. end
>    
>   Please tell me what I am missing? I have been working on this problem for several days now.
>    
>   Thanks, Ed
> 
>  
> ---------------------------------
> Want to start your own business? Learn how on Yahoo! Small Business.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist